Features

• Fully Integrated UHF RF Transceiver
  • Programmable frequency in the range 300 - 1000 MHz
  • High sensitivity (typically -107 dBm at 2.4 kBaud)
  • Programmable output power -20 to +10 dBm
  • Very low current consumption (RX: 9.1 mA)
  • Very few external components required and no external RF switch or IF filter required
  • Single port antenna connection
  • Fast PLL settling allows frequency hopping protocols
  • FSK modulation with a data rate of up to 76.8 kBaud
  • Manchester or NRZ coding and decoding of data performed in hardware. Byte delineation of data can be performed in hardware to lessen the processor burden
  • RSSI output which can be sampled by on-chip ADC
  • Complies with EN 300 220 and FCC CFR47 part 15
• High-Performance and Low-Power 8051-Compatible Microcontroller
  • Optimised 8051-core which typically gives 2.5x the performance of a standard 8051
  • Dual data pointers
  • Idle and sleep modes
  • In-circuit interactive debugging is supported for the Keil µVision IDE through a simple serial interface
• Data and Non-volatile Program Memory
  • 32 kB of non-volatile Flash memory in-system programmable through a simple SPI interface or by the 8051 core.
  • Typical Flash memory endurance: 20 000 write/erase cycles
  • Programmable read and write lock of portions of Flash memory for software security
  • 2048 + 128 Byte of internal SRAM
• Hardware DES Encryption / Decryption
  • DES supported in hardware
  • Output Feedback Mode or Cipher Feedback Mode DES to avoid the requirement that data length must be a multiple of eight bytes
• Peripheral Features
  • Power On Reset / Brown-Out Detection
  • Three channel, max 23 kSample/s, 10 bit ADC
  • Programmable watchdog timer.
  • Real time clock with 32 kHz crystal oscillator
  • Two timers / pulse counters and two timers / pulse width modulators
  • Two programmable serial UARTs.
  • Master SPI interface
  • 26 configurable general-purpose I/O-pins
  • Random bit generator in hardware
• Low Power
  • 8051 core and peripherals can use the RTC's 32 kHz clock
  • Idle and sleep modes for reduced power consumption. System can wake up on interrupt or when ADC input exceeds a set threshold
  • Low-power fully static CMOS design
• Operating Conditions
  • 2.7 - 3.6 V supply voltage
  • -40 - 85 °C operational temperature
  • 3 - 24 MHz crystal (up to 50 ppm) for the main crystal oscillator
• Packaging
  • 64-lead TQFP
• Applications
  • Very low power UHF wireless data transmitters and receivers
  • 315 / 433 / 868 and 915 MHz ISM/SRD band systems
  • Home automation and security
  • AMR - Automatic Meter Reading
  • RKE - Remote Keyless Entry with acknowledgement
  • Low power telemetry
  • Toys

Description

The CC1010 is a true single-chip UHF transceiver with an integrated high performance 8051 microcontroller with 32 kB of Flash program memory. The RF transceiver can be programmed for operation in the 300 - 1000 MHz range, and is designed for very low power wireless applications.

The CC1010 together with a few external passive components constitutes a powerful embedded system with wireless communication capabilities.

CC1010 is based on Chipcon’s SmartRF®02 technology in 0.35 µm CMOS